1) Fill in the use file in time immediately after functioning the glove box, which include "user, water oxygen value, what to do"
2) When replacing fuel cylinders in the glove box, the force is set to the default worth ± 3mbar
3) The each day doing work pressure is set according to the running comfort. When not in use for a extended time, the strain is set to 1-6mbar
4) On a regular basis check out the use of the gloves, verify the oil degree of the vacuum pump (among the upstream and downstream markings), and incorporate the pump oil properly
5) Clean the h2o probe after each and every two to 3 months to make sure precise detection. (Also want to refer to the genuine problem of the setting in distinct user boxes
6) If you typically use natural solvents in the glove box, it is advisable that you consistently change the organic and natural solvent adsorbent substance, not later on than 1 calendar year at the most up-to-date
seven) Change the filter component often, no afterwards than two a long time
8) According to the real use of your glove box, decide to swap the vacuum pump oil cycle, these types of as black and yellow pump oil, h2o or far more natural solvents in the pump oil. The oil replacement cycle should not exceed two a long time at the most current
nine) If a significant sum of natural solvent is inevitably exposed through the experiment, the cycle desires to be stopped for the experiment. Soon after the experiment, very first clean up and then begin the cycle
ten) When the atmosphere in the box is harmful or unsafe fuel, the exhaust port of the vacuum pump, the exhaust port of the regeneration gasoline and innovative technology glovebox the exhaust port of the cleansing valve need to be exhausted to the outdoor with an exhaust pipe (when exhaust is not permitted to be outside, the exhaust gasoline therapy will have to be completed first).